Disc Stack Large Capacity Centrifugal Waste Oil Separator Centrifuge Machinery
Product overview
Model PDSD14000 separator is mainly used to remove water and mechanical impurities from diesel oil, lubricating oil and other mineral oil in marine diesel engine unit and land-used diesel generator unit of power station so as to reduce wear of the diesel engine and other machine, and prolong engine life.
The model is also used to separate two unsolvable liquids with different specific gravity or remove small amount of solid particle from liquid.
The machine has the advantages of high efficiency, low oil consumption, convenient operation and economic maintenance cost.The clear oil and dirty water are let out freely, the sludge is discharged manually.
Advantage
1. Self Cleaning type slag removal unit
2. Modular design
3. Automatic control
Technical parameter
| Discharging type | Self Cleaning |
| Max capacity | L/h | 14000(0# diesel oil) |
| Motor power | Kw | 11-15 |
| N.W. | kg | 730 |
| Volume of the slag cavity | L | 2 |
| Discharge type | Variable discharge |
| Type of output | Centripetal pump |
| Installation dimension | L × W × H (mm) | 1200x810x1225 |
Other oil capacity reference chart
| oil types | fuel oil | lubrication oil |
| fuel oil | heavy fuel oil | SAE30,40 | detergence oil | steam turbine oil |
| kinematical viscosity(mm2/s) | 1.9-5.5 | 5.5-24 | 120 | 180 | 380 | 100-120 | 61.2-74.8 |
| 40°C | 50°C | 40°C | 40°C |
| density/(kg/m3)(20°C) | less than 900 | 900-991 | 880-900 | less than 900 |
| separating temperature (°C) | normal temperature, 40-60best | 90-98 | 80-95 |
| recommended capcity (l/h) | 17500 | 14000 | 7700-8400 | 6300-7000 | 4900-5600 | 7000-8400 | 3500-4200 | 11200-11900 |
Pictures
Value Analysis
1. According to the requirements of each classification society, all modules are equipped with oil leak alarm and high temperature alarm.
2. Oil hydraulic,pneumatic control part adopts the Brand BURKERT (Germany).
3. Heater adopts brand SWEP (Germany).
4. Pressure control adopts Korean products or products
5. Screw pump is used instead of gear pump.
6. All equipped with automatic temperature control device (Made by the RTK production in Germany or made in China)
7. The main electrical components of standard electrical control box are produced by Schneider company while PLC is produced by Siemens or Mitsubishi.
8. The complete sets referred above are all Peony’s production of automatic Standard Controls and we certainly can modify the configuration list according to customers’ specified requirements.
Relation application
Product Tags:
|
|
Disc Stack Large Capacity Centrifugal Waste Oil Separator Machinery Images
|
